CHEM 102 Lecture 12: Gases Properties and Behavior

This lecture, part of CHEM 102, explores the fundamental properties and behaviors of gases, which are essential for understanding various chemical and physical phenomena.


Learning Outcomes

By the end of this lecture, students should be able to:


Characteristics of Gases

Gases exhibit several unique characteristics that differentiate them from liquids and solids:


Pressure and Units of Pressure

Pressure is defined as the amount of force applied to an area:

\[ P = \frac{F}{A} \]

Atmospheric pressure is the weight of air per unit of area.

Calculating Atmospheric Pressure:

To calculate the magnitude of atmospheric pressure, consider that the force exerted by any object is the product of its mass and its acceleration. For atmospheric pressure, the force (F) is given by F = mg, where 'm' is the mass of the air column and 'g' is the acceleration due to gravity (approximately 9.8 m/s²).

If a column of air with a 1 m² cross-section, extending through the atmosphere, has a mass of 10,000 kg, the gravitational force exerted on this column would be:

\[ F = 10,000 \, \text{kg} \times 9.8 \, \text{m/s}^2 = 1 \times 10^5 \, \text{kg} \cdot \text{m/s}^2 = 1 \times 10^5 \, \text{N} \]

Where 'N' (Newton) is the SI unit for force, equal to 1 kg·m/s².

Units of Pressure:

The SI unit for pressure is the Pascal (Pa), defined as one Newton per square meter (N/m²). Other common units include millimeters of mercury (mmHg) or torr, and atmospheres (atm).

Unit Conversion
**Pascal (Pa)** 1 Pa = 1 N/m²
**Standard Atmosphere (atm)** 1 atm = 101325 Pa
**Millimeters of Mercury (mmHg) / Torr** 1 atm = 760 mmHg = 760 torr
**Bar** 1 bar = 10⁵ Pa = 100 kPa

Standard atmospheric pressure is the typical pressure at sea level, sufficient to support a column of mercury 760 mm high.

Examples of Unit Conversion:


Variables Affecting Gas Pressure

In a gaseous system, pressure can be changed by altering three main variables:


The Gas Laws

To define the physical condition, or state, of a gas, four variables are needed: temperature (T), pressure (P), volume (V), and amount of gas (n, usually expressed in moles). The relationships among these variables are known as the gas laws.

A. Boyle’s Law: The Pressure-Volume Relationship

British chemist Robert Boyle investigated the quantitative relationship between the pressure of a gas and its volume. Boyle's Law states that the volume of a fixed quantity of gas at constant temperature is inversely proportional to the pressure.

\[ P \propto \frac{1}{V} \quad \text{or} \quad PV = k \]

Where 'k' is a constant. This means that as pressure increases, volume decreases, and vice-versa, assuming constant temperature and number of moles.

Example: When an inflated balloon is released at Earth's surface and rises, it expands because the atmospheric pressure decreases at higher altitudes. This is a direct application of Boyle's Law.

B. Charles’s Law: The Temperature-Volume Relationship

French scientist Jacques Charles discovered the relationship between the temperature and volume of a gas. Charles's Law states that the volume of a fixed amount of gas at constant pressure is directly proportional to its absolute temperature.

\[ V \propto T \quad \text{or} \quad \frac{V}{T} = k \]

Where 'k' is a proportionality constant and 'T' must be in Kelvin. A plot of V versus T will yield a straight line. If extrapolated, the line passes through -273°C (0 Kelvin), at which point the gas is predicted to have zero volume. However, all gases liquefy or solidify before reaching this temperature.

Example: An inflated balloon expands when heated and shrinks when cooled, demonstrating the direct relationship between volume and temperature.

C. Gay-Lussac’s Law: The Pressure-Temperature Relationship

Gay-Lussac's Law states that the pressure and absolute temperature (K) of a gas are directly related at constant mass and volume.

\[ P \propto T \quad \text{or} \quad \frac{P}{T} = k \]

Example: A pressure cooker uses this principle; by sealing the lid, the volume of steam is kept constant, and as the temperature increases, so does the pressure, leading to faster cooking.

D. Avogadro’s Principle: The Quantity-Volume Relationship

Avogadro’s Hypothesis, proposed by Amedeo Avogadro, states that equal volumes of gases at the same temperature and pressure contain equal numbers of molecules. This means the volume of a gas at constant temperature and pressure is directly proportional to the number of moles (n) of the gas.

\[ V \propto n \quad \text{or} \quad V = kn \]

Example: If you double the amount of gas in a flexible container (like a balloon) at constant temperature and pressure, the volume of the balloon will double.


Ideal-Gas Equation

The three gas laws (Boyle's, Charles's, and Avogadro's) can be combined into a single, comprehensive equation known as the Ideal Gas Law. This law relates all four variables (P, V, n, T) that define the state of a gas:

Combining these proportionalities yields:

\[ V \propto \frac{nT}{P} \]

Introducing a constant of proportionality, R (the universal gas constant), we get the Ideal Gas Equation:

\[ PV = nRT \]

Where:

Exercise 1: Calculating Moles of Gas

Calcium carbonate, CaCO₃(s), the principal compound in limestone, decomposes upon heating to CaO(s) and CO₂(g). A sample of CaCO₃ is decomposed, and the carbon dioxide is collected in a 250-mL flask. After decomposition is complete, the gas has a pressure of 1.3 atm at a temperature of 31 °C. How many moles of CO₂ gas were generated?

**Solution:**

Using the Ideal Gas Law, PV = nRT, we can solve for n:

Given:

Rearrange the formula to solve for n: \( n = \frac{PV}{RT} \)

\[ n = \frac{(1.3 \, \text{atm})(0.250 \, \text{L})}{(0.08206 \, \text{L} \cdot \text{atm} \cdot \text{mol}^{-1} \cdot \text{K}^{-1})(304 \, \text{K})} \] \[ n = \frac{0.325}{24.94784} \approx 0.0130 \, \text{mol of CO}_2 \]

Exercise 2: Calculating Pressure Inside a Tennis Ball

Tennis balls are usually filled with either air or N₂ gas to a pressure above atmospheric pressure to increase their bounce. If a tennis ball has a volume of 144 cm³ and contains 0.33 g of N₂ gas, what is the pressure inside the ball at 24 °C?

**Solution:**

First, convert the given values to the appropriate units:

Next, calculate the number of moles (n) of N₂ gas. The molar mass of N₂ is 2 × 14.01 g/mol = 28.02 g/mol.

\[ n = \frac{0.33 \, \text{g}}{28.02 \, \text{g/mol}} \approx 0.01178 \, \text{mol} \]

Now, use the Ideal Gas Law, PV = nRT, to solve for P:

\[ P = \frac{nRT}{V} \] \[ P = \frac{(0.01178 \, \text{mol})(0.08206 \, \text{L} \cdot \text{atm} \cdot \text{mol}^{-1} \cdot \text{K}^{-1})(297 \, \text{K})}{0.144 \, \text{L}} \] \[ P = \frac{0.2878}{0.144} \approx 1.9999 \, \text{atm} \] \[ P \approx 2.00 \, \text{atm} \]