MATH103 for Engineering: Lecture #7 Summary
This lecture continues Chapter 2 of MATH103 for Engineering, focusing on advanced techniques for limits, including the Sandwich Theorem, and introduces one-sided limits.
Chapter 2: Limits of Functions (Continued)
Techniques of Limits (Continued)
- Direct Substitution
- If the limit results in an indeterminate form ($\frac{0}{0}$), "Undetermined":
- We must cancel the zero factor (i.e., identify common factors) by:
- Factorizing both numerator and denominator.
- Multiplying by the conjugate.
- Important rule: $\lim_{\theta\rightarrow0}\frac{sin~\theta}{\theta}=1$. This rule is also valid with "tan".
- This is an important result.
- Proof Example ($\lim_{x\rightarrow0}\frac{sin~2x}{sin~3x}$):
$\lim_{x\rightarrow0}\frac{sin~2x}{sin~3x} = \lim_{x\rightarrow0}(\frac{sin~2x}{sin~3x}.\frac{x}{x}) = \lim_{x\rightarrow0}(\frac{sin~2x}{x}.\frac{x}{sin~3x})$
$= \lim_{x\rightarrow0}\frac{sin~2x}{x}\cdot \lim_{x\rightarrow0}\frac{x}{sin~3x}$
$= \frac{2}{3}\lim_{2x\rightarrow0}\frac{sin~2x}{2x}\cdot \lim_{3x\rightarrow0}\frac{3x}{sin~3x} = \frac{2}{3}$
- Proof Example ($\lim_{x\rightarrow0}\frac{tan~2x}{sin~3x}$):
$\lim_{x\rightarrow0}\frac{tan~2x}{sin~3x} = \frac{2}{3}\lim_{x\rightarrow0}(\frac{tan~2x}{2x}\cdot\frac{3x}{sin~3x})$
$= \frac{2}{3}\lim_{2x\rightarrow0}\frac{tan~2x}{2x}\cdot \lim_{3x\rightarrow0}\frac{3x}{sin~3x} = \frac{2}{3}\lim_{2x\rightarrow0}\frac{tan~2x}{2x}$
$= \frac{2}{3}\lim_{2x\rightarrow0}\frac{sin~2x}{2x}\cdot \lim_{x\rightarrow0}\frac{1}{cos~2x} = \frac{2}{3}$
- Squeezing "Sandwich" Theorem
- We use it with Bounded functions ONLY.
- Theorem 4: Suppose that $g(x)\le f(x)\le h(x)$ for all $x$ in some open interval containing $c$, except possibly at $x=c$ itself.
- Suppose also that $\lim_{x\rightarrow c}g(x)=\lim_{x\rightarrow c}h(x)=L$.
- Then $\lim_{x\rightarrow c}f(x)=L$.
- Example 1: If $1-\frac{x^{2}}{2}\le u(x)\le1+\frac{x^{2}}{2}$, find $\lim_{x\rightarrow0}u(x)$.
- Since, $\lim_{x\rightarrow0}(1-\frac{x^{2}}{2})=1=\lim_{x\rightarrow0}(1+\frac{x^{2}}{2})$, then (by the sandwich theorem) $\lim_{x\rightarrow0}u(x)=1$.
- Example 2: Prove that: $\lim_{x\rightarrow0}x^{2}sin(\frac{1}{x})=0$.
- Notice that, $-1\le sin(1/x)\le1$, so $-x^{2}\le x^{2}sin(1/x)\le x^{2}$.
- As $\lim_{x\rightarrow0}x^{2}=0$ and $\lim_{x\rightarrow0}(-x^{2})=0$, therefore, by the sandwich theorem: $\lim_{x\rightarrow0}x^{2}sin(\frac{1}{x})=0$.
- Limits at infinity
- When $x$ increases without bound ($x \rightarrow \infty$), the values of the function are very close to zero.
- Similarly, when $x$ decreases without bound ($x \rightarrow -\infty$), the values of the function are very close to zero.
- Technique for rational functions: To find the limit of a rational function as $x \rightarrow \pm\infty$, divide both the numerator and denominator by the highest order term in the denominator, then evaluate the limit.
- Example: For $\lim_{x\rightarrow\infty}(2+\frac{sin~x}{x})=2$.
- Since $-1 \le \sin x \le 1$, we have $-\frac{1}{x} \le \frac{\sin x}{x} \le \frac{1}{x}$ for $x > 0$.
- As $\lim_{x\rightarrow\infty} -\frac{1}{x} = 0$ and $\lim_{x\rightarrow\infty} \frac{1}{x} = 0$, by the Sandwich Theorem, $\lim_{x\rightarrow\infty} \frac{sin~x}{x} = 0$.
- Therefore, $\lim_{x\rightarrow\infty}(2+\frac{sin~x}{x})=2+0=2$.
- L'Hopital's Rule (this technique will be covered after differentiation)
One-Sided Limit (Motivation)
Consider the Heaviside (unit step) function defined as: $y(x)=\begin{cases}0,&x<0\\ 1,&x\ge0\end{cases}$
- As $x\rightarrow0$ from the left ($x<0$), we can see that $y(x)\rightarrow0$. This is written as: $\lim_{x\rightarrow0^{-}}y(x)=0$.
- As $x\rightarrow0$ from the right ($x>0$), we can see that $y(x)\rightarrow1$. This is written as: $\lim_{x\rightarrow0^{+}}y(x)=1$.
- Therefore, there is no unique number that $y(x)$ approaches as $x\rightarrow0$. Thus, $\lim_{x\rightarrow0}y(x)=$ Does Not Exist "DNE".
Formal Definition of One-Sided Limit
- We say that the limit of $f(x)$ equals $L$ as "$x \rightarrow a^{-}$" ($x$ approaches $a$ from left), if the values of $f(x)$ are arbitrarily close to a unique number $L$, when the values of $x$ are sufficiently close to $a$ ($x < a$), but not necessarily equal to $a$.
- We say that the limit of $f(x)$ equals $M$ as "$x \rightarrow a^{+}$" ($x$ approaches $a$ from right), if the values of $f(x)$ are arbitrarily close to a unique number $M$, when the values of $x$ are sufficiently close to $a$ ($x > a$), but not necessarily equal to $a$.
When is it necessary to study left-hand and right-sided limits?
- If $f(x)$ is defined differently "with different expressions" around the limit study point.
- Whenever we have a modulus, and its symmetric point is the same as the limit study point.
Conclusion: If the function is defined on a closed interval $[a, b]$, then at point "$a$" we can only calculate the right-sided limit, and at point "$b$" we can only calculate the left-sided limit.