This lecture, presented by Dr. Ahmed Maarouf, introduces the fundamental concepts of rotational motion for rigid bodies, focusing on rotational kinematics, moment of inertia, torque, and rotational kinetic energy. [cite_start]It draws parallels between linear and rotational quantities and provides essential formulas and examples for analyzing rotating systems. [cite: 174, 175, 177, 179]
[cite_start]A **rigid object (body)** is a non-deformable object whose dimensions do not change during its motion, and the relative locations of all its constituent particles remain constant. [cite: 261, 262, 263] [cite_start]This model simplifies the analysis of extended solid objects, especially when deformation is negligible. [cite: 259, 260, 264]
[cite_start]The angular position of a rigid object is defined as the angle between a reference line attached to the object and a reference line fixed in space (often the x-axis). [cite: 181, 268, 269, 270, 274, 282, 310, 311] [cite_start]It plays the same role in rotational motion as translational position ($x$) in linear motion. [cite: 312] [cite_start]Polar coordinates $(r, \theta)$ are convenient for representing the position of a point on a rotating disc, where $r$ is the distance from the origin $O$ to the point $P$, and $\theta$ is measured counterclockwise from the reference line. [cite: 271, 273, 275, 276, 277, 278]
As a particle at $P$ moves through an angle $\theta$, it sweeps an arc length $s$ on a circular path of radius $r$. [cite_start]These quantities are related by: [cite: 294, 295, 296, 298] \[ s = r\theta \quad \text{or} \quad \theta = \frac{s}{r} \] [cite_start]Here, $s$ and $r$ are in meters, and $\theta$ is measured in **radians**. [cite: 296, 298, 303] [cite_start]One radian is the angle subtended by an arc whose length equals the radius of the arc. [cite: 304] \[ 1 \, \text{rad} = \frac{360^\circ}{2\pi} \approx 57.3^\circ \] [cite_start]\[ \theta(\text{rad}) = \frac{\pi}{180^\circ} \theta(\text{deg}) \] [cite: 306, 307]
[cite_start]The angular displacement is the angle an object rotates through during a time interval. [cite: 182, 313] [cite_start]It is the angle swept out by the reference line of length $r$: [cite: 314] [cite_start]\[ \Delta\theta \equiv \theta_f - \theta_i \] [cite: 182, 315] [cite_start]Every particle in a rigid object rotates through the same angular displacement. [cite: 189, 315, 142]
[cite_start]The **average angular velocity** ($\omega_{avg}$) is the ratio of angular displacement to the time interval: [cite: 316] [cite_start]\[ \omega_{avg} = \frac{\Delta\theta}{\Delta t} = \frac{\theta_f - \theta_i}{t_f - t_i} \] [cite: 316] [cite_start]The **instantaneous angular speed** ($\omega$) is the limit of the average angular speed as $\Delta t$ approaches zero: [cite: 183, 184, 318, 319] [cite_start]\[ \omega \equiv \frac{d\theta}{dt} \] [cite: 184] [cite_start]Units of angular velocity are radians/second (rad/s or rad·s⁻¹). [cite: 184, 317] [cite_start]Angular velocity $\omega$ is positive for counterclockwise rotation ($\theta$ increasing) and negative for clockwise rotation ($\theta$ decreasing). [cite: 320, 145]
[cite_start]The **average angular acceleration** ($\alpha_{avg}$) is the ratio of the change in angular velocity to the time taken: [cite: 322] [cite_start]\[ \alpha_{avg} = \frac{\Delta\omega}{\Delta t} = \frac{\omega_f - \omega_i}{t_f - t_i} \] [cite: 322] [cite_start]The **instantaneous angular acceleration** ($\alpha$) is the limit of the average angular acceleration as $\Delta t$ approaches zero (the time derivative of $\omega$): [cite: 186, 187, 323] [cite_start]\[ \alpha \equiv \frac{d\omega}{dt} \] [cite: 187] [cite_start]Units of angular acceleration are radians/second squared (rad/s²). [cite: 187, 323] [cite_start]Angular acceleration $\alpha$ is positive if an object rotating counterclockwise is speeding up, and negative if it is slowing down while rotating counterclockwise. [cite: 324] [cite_start]For a rigid object rotating about a fixed axis, every part of the object has the same angular speed and angular acceleration. [cite: 189, 142]
[cite_start]When a rigid object rotates about a fixed axis under constant angular acceleration, kinematic equations analogous to those for translational motion can be applied. [cite: 113, 114, 239, 145, 146] [cite_start]The substitutions are $x \to \theta$, $v \to \omega$, and $a \to \alpha$. [cite: 146]
[cite_start]While every point on a rotating rigid body has the same angular motion ($\theta, \omega, \alpha$), different points may have different linear motions ($s, v, a$) because the linear quantities depend on the distance $r$ from the axis of rotation. [cite: 147, 148, 149, 150, 151]
[cite_start]When an object rotates about an axis with angular speed $\omega$, it possesses rotational kinetic energy. [cite: 156] Each particle in the object has kinetic energy $K_i = \frac{1}{2}m_i v_i^2$. [cite_start]Since $v_i = r_i\omega$, the total rotational kinetic energy is found by summing over all particles. [cite: 157]
[cite_start]The **moment of inertia ($I$)** is a measure of an object's resistance to changes in its rotational motion. [cite: 163] [cite_start]It depends on the mass of the object and how that mass is distributed around the axis of rotation. [cite: 162, 164]
[cite_start]For a system of particles, the moment of inertia is defined as: [cite: 108, 197, 164] \[ I \equiv \sum_i m_i r_i^2 \] [cite_start]Where $m_i$ is the mass of the $i^{th}$ particle and $r_i$ is its perpendicular distance from the rotation axis. [cite: 198]
[cite_start]For a continuous rigid object, the moment of inertia is found by integrating over all mass elements: [cite: 111, 211, 212, 161, 164, 165] \[ I = \int r^2 dm \] [cite_start]Where $r$ is the distance from the mass element $dm$ to the axis of rotation. [cite: 213]
[cite_start]Different mass distributions can be described using densities: [cite: 166, 167]
[cite_start]The parallel-axis theorem simplifies the calculation of the moment of inertia for an arbitrary axis that is parallel to an axis passing through the center of mass. [cite: 168, 169] [cite_start]\[ I = I_{CM} + MD^2 \] [cite: 169] Where:
[cite_start]If the moment of inertia of a uniform rod of mass $M$ and length $L$ about an axis through its midpoint (CM) is $I_{CM} = \frac{1}{12}ML^2$, [cite: 172] [cite_start]then the moment of inertia about an axis passing through one of its ends (where $D = L/2$) is: [cite: 172] [cite_start]\[ I = I_{CM} + MD^2 = \frac{1}{12}ML^2 + M\left(\frac{L}{2}\right)^2 = \frac{1}{12}ML^2 + \frac{1}{4}ML^2 = \frac{1}{3}ML^2 \] [cite: 172]
[cite_start]If a rigid object rotates about a fixed axis with angular speed $\omega$, its rotational kinetic energy is: [cite: 110, 206] [cite_start]\[ K_R = \frac{1}{2}I\omega^2 \] [cite: 207] [cite_start]Where $I$ is the moment of inertia about the axis of rotation. [cite: 209, 158]
[cite_start]For a rigid object rolling on a rough surface without slipping, its total kinetic energy ($K$) is the sum of its rotational kinetic energy about its center of mass ($I_{CM}$) and the translational kinetic energy of its center of mass ($M v_{CM}^2$): [cite: 113, 231, 232] [cite_start]\[ K = \frac{1}{2}I_{CM}\omega^2 + \frac{1}{2}Mv_{CM}^2 \] [cite: 232]
**Torque** is the rotational equivalent of force; it is what causes an object to rotate or change its rotational motion.
[cite_start]The magnitude of the torque associated with a force $\vec{F}$ acting on an object at a distance $r$ from the rotation axis is: [cite: 109, 199, 200] [cite_start]\[ \tau = rF \sin\phi = Fd \] [cite: 200] Where:
If a rigid object free to rotate about a fixed axis has a net external torque acting on it, the object undergoes an angular acceleration $\alpha$. [cite_start]This relationship is the rotational analog to Newton's Second Law ($\sum \vec{F} = m\vec{a}$). [cite: 115, 252, 253, 255] [cite_start]\[ \sum\tau_{ext} = I\alpha \] [cite: 253]
[cite_start]If work is done on a rigid object and the only result of the work is rotation about a fixed axis, the net work done by external forces in rotating the object equals the change in its rotational kinetic energy: [cite: 112, 113, 229, 230] [cite_start]\[ \sum W = \frac{1}{2}I\omega_f^2 - \frac{1}{2}I\omega_i^2 \] [cite: 230]
[cite_start]The rate at which work is done by an external force in rotating a rigid object about a fixed axis, or the power delivered, is: [cite: 112, 226, 227, 228] [cite_start]\[ P = \tau\omega \] [cite: 228]