This lecture, presented by Dr. Ahmed Maarouf, covers the conditions for dynamic and static equilibrium of rigid extended objects, the concept of the center of gravity, and a systematic approach to solving equilibrium problems. [cite_start]It then introduces elasticity, defining stress, strain, and different elastic moduli, along with practical applications like prestressed concrete. [cite: 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99]
[cite_start]For an extended rigid object to be in dynamic equilibrium, two conditions must be satisfied: [cite: 92]
[cite_start]Zero net force and zero net torque do not necessarily mean the object is at rest; it can be moving with constant velocity or rotating with constant angular velocity. [cite: 103, 104, 105, 106]
[cite_start]For applications restricted to forces lying in the xy-plane (coplanar forces), these two vector conditions reduce to three scalar equations: [cite: 116, 117, 118]
[cite_start]The location of the pivot for calculating torque is arbitrary and can be chosen to simplify calculations. [cite: 121, 185, 186] [cite_start]A force acting along a line passing through the chosen pivot produces zero torque. [cite: 187]
[cite_start]Static equilibrium is a special case of dynamic equilibrium where, in addition to the conditions for dynamic equilibrium, the object is not moving at all. [cite: 126]
[cite_start]The conditions for static equilibrium are the same as for dynamic equilibrium: [cite: 130, 132, 133] [cite_start]\[ \sum\vec{F}_{ext}=0 \] [cite: 132] [cite_start]\[ \sum\vec{\tau}_{ext}=0 \] [cite: 133]
[cite_start]All gravitational forces acting on different mass elements of an object are equivalent to a single gravitational force ($\vec{F}_g = M\vec{g}_{CG}$) acting through a single point called the center of gravity (CG). [cite: 10, 150]
[cite_start]The coordinates of the center of gravity for a system of particles are: [cite: 12] [cite_start]\[ x_{CG}=\frac{m_{1}x_{1}+m_{2}x_{2}+m_{3}x_{3}+\cdot\cdot\cdot}{m_{1}+m_{2}+m_{3}+\cdot\cdot\cdot}=\frac{\sum_{i}m_{i}x_{i}}{\sum_{i}m_{i}} \] [cite: 140] [cite_start]Similar expressions apply for the y and z coordinates. [cite: 151]
[cite_start]If an object is homogeneous, symmetric, and has a uniform mass distribution, its center of mass coincides with its geometric center. [cite: 13, 153]
[cite_start]A systematic approach for solving equilibrium problems involves the following steps: [cite: 158]
A seesaw of uniform board mass $M$ and length $l$ supports a father ($m_f$) and daughter ($m_d$). The support (fulcrum) is under the center of gravity of the board. The father is a distance $d$ from the center, and the daughter is a distance $l/2$ from the center. [cite_start]The task is to determine the magnitude of the upward normal force ($\vec{n}$) exerted by the support on the board. [cite: 202]
To solve this, apply the conditions for static equilibrium:
[cite_start]The other examples mentioned, such as a horizontal beam and a ladder, follow the same problem-solving methodology, applying the two conditions of equilibrium. [cite: 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46]
**Elasticity** is the ability of an object to recover its original shape after a deforming external force is removed. [cite_start]All materials are deformable to some extent due to internal forces that resist deformation. [cite: 46, 47, 48]
[cite_start]Deformation is described by two quantities: [cite: 49]
[cite_start]The **elastic modulus** is the ratio between stress and strain. [cite: 51] [cite_start]It depends on the material and the nature of the deformation. [cite: 52] [cite_start]It relates the action on a solid object to its response. [cite: 53]
[cite_start]There are three main types of elastic moduli: [cite: 54]
[cite_start]**Compressibility** is the inverse of the bulk modulus. [cite: 71]
For certain stresses, stress is directly proportional to strain (elastic behavior). The **elastic limit** is the maximum stress a substance can withstand before it becomes permanently deformed. Beyond this, it enters the plastic deformation region, and the relationship is no longer linear. [cite_start]With further stress, the material eventually breaks. [cite: 57, 58]
Concrete is typically brittle in thin sections and stronger under compression than tension. To strengthen it, steel rods are used. **Prestressed concrete** further increases shear strength by holding steel rods under tension while the concrete cures. [cite_start]When the external forces are released, the tension in the steel creates a permanent compressive stress on the concrete, allowing it to support much heavier loads. [cite: 74, 75, 76, 77, 78, 79, 80, 81, 82]